Buddies News

Scientists estimate materials demand for all silicon PV module applied sciences by 2050 – pv journal International


Dutch researchers used dynamic modeling to find out the necessity for silicon-based PV supplies utilized in a variety of silicon PV applied sciences, together with perovskite-silicon tandem and back-contact modules . The mannequin contains calculating the influence of enhancements in module effectivity and materials depth, in addition to round closed loop recycling.

A analysis group within the Netherlands used dynamic modeling to calculate the demand for silicon-based PV supplies in future eventualities that embody the deployment of perovskite-silicon tandem and back-contact applied sciences, and imply that net-zero greenhouse fuel emissions targets are achievable. It contains calculation with module effectivity and materials depth enchancment.

In view of the exponential progress of solar energy and silicon-based PV modules and the potential materials demand, the group asks the query of how a lot of an affect the PV know-how selection can have on the demand for supplies similar to of indium and silver.

To discover the solutions, the staff used a dynamic materials move evaluation (dMFA) mannequin developed particularly for silicon-based PV. The dMFA technique they used captures the longer term annual dynamics of PV deployment capability, module effectivity, materials composition, and market share for various PV applied sciences.

“The most attention-grabbing side of the analysis is the mannequin itself, which incorporates the annual dynamics of PV deployment capability module effectivity, materials compositions and market shares for varied PV applied sciences till 2050,” the lead creator of the analysis, Chengjian Xu, mentioned. pv journal.

In its modeling, the staff recognized potential shortages of silver and indium but additionally that technological advances, similar to improved PV module effectivity and decreased materials mass per module space, are a possibility to have an effect on want. For instance, the annual demand for PV module supplies, similar to silicon, aluminum, silver, and different supplies, will be decreased by 46%, 35%, 30%, and 13% respectively, in comparison with situation with out such developments. In addition, closed-loop recycling can cut back materials demand by 10% to 30%.

The mannequin contains varied silicon PV applied sciences: aluminum again floor subject (Al-BSF), passivated emitter and rear contact (PERC), tunnel oxide passivated contact (TOPCon), silicon heterojunctions (SHJ), interdigitated again contact ( IBC), and perovskite-silicon tandem, in four-terminal (4T) and two-terminal (2T) tandem variations.

“This research offers a extra complete know-how roadmap in comparison with present ones, which regularly give attention to a restricted variety of applied sciences and don’t discover the perovskite-silicon tandem,” mentioned the researchers. .

The effectivity limits had been set at 20% for Al-BSF, 24% for PERC, 26% for TOPCon and SHJ, 26.5% for IBC, and 39% for perovskite-silicon tandem modules. Higher effectivity for bifacial PV modules is taken into account.

Historical information on PV deployment capability from 2000 to 2022 from the International Renewable Energy Agency (IRENA). Two future PV deployment eventualities are used, one from the International Energy Agency (IEA), which represents a conservative PV situation, and an optimistic situation, based mostly on predictions made in 2021 by one other analysis staff. Both have the objective of attaining net-zero emissions by 2050.

For know-how choice, the staff used information from the International Technology Roadmap for Photovoltaic (ITRPV) to 2030 and additional extrapolated it to 2050 by incorporating estimates from different sources.

The outcomes for the interval from 2022 to 2050, present that the demand for indium might improve between 38 and 286 instances the established order, silver by 4 to 27 instances, with the demand for different supplies rising by 2 to twenty instances, relying on the PV deployment situation. .

“The demand for indium and silver is considerably influenced by the selection of PV know-how,” the researchers mentioned. Cumulative indium demand within the interval 2022–2050 may vary from 0 kt in a 100% PERC and TOPCon situation to 209 kt in a 100% perovskite-silicon four-terminal tandem PV. Cumulative silver demand over the identical interval can differ from 144 kt in a 100% PERC PV situation to 1121 kt with 100% silicon heterojunction PV penetration.

They additionally emphasised that enhancements in materials depth may cut back the annual demand for PV module supplies by 46% for silicon, 35% for aluminum, 30% for silver, and 13% for different supplies, in comparison with eventualities with out such enhancements.

In addition, they mentioned, “A promising technique to mitigate the elevated demand for main supplies is closed-loop recycling. By implementing environment friendly PV assortment and recycling processes , the cumulative main materials demand could possibly be decreased by 10% to 30% between 2022 and 2050.

The analysis is detailed in “Future materials demand for world silicon-based PV modules beneath net-zero emissions goal till 2050,” printed in Resources, Conservation and Recycling. The research individuals had been from Delft University of Technology and Leiden University.

Looking forward, Xu mentioned there are plans to replace the know-how roadmap information and additional develop the scope of the analysis to incorporate the related steadiness of the system’s materials part wants sooner or later. eventualities.

This content material is protected by copyright and will not be reused. If you wish to cooperate with us and wish to reuse a few of our content material, please contact: editors@pv-magazine.com.

Popular content material



Source link

Exit mobile version